Serving Seattle & Surrounding Areas — Free Inspection
(206) 445-7386 Mon–Sat: 7AM–6PM
★★★★★ See Our Customer Reviews →
Home
Services
Locations
About Contact
Licensed & Insured Contractors

Seattle Deck Builders Who Build to Code

Custom decks, composite decking, and repairs engineered for Seattle's wet climate. We handle permits, ledger board ties, and structural work your deck actually needs.

Request Your Free Inspection
Choose your service below
Decking
Custom Deck Building
Deck Staining & Sealing
Deck Repair & Restoration
Other Service
Fully Licensed & Insured
Pergola Installation
Engineered, Warrantied Repairs

Decking Services Built for Seattle's Climate

Seattle's constant moisture and shade demand decks that drain fast and resist rot. We build with proper joists, footings, and material choices that stand up to decades of drizzle.

Composite Decking: Low-Maintenance Outdoor Living

Capped composite decking eliminates splinters, rot, and annual staining cycles—critical in Seattle's wet climate. We install premium 4-sided capped products with 25+ year fade and stain warranties, so your deck stays beautiful without the maintenance burden of traditional wood.

Custom Deck Building for Seattle Homes

From steep Magnolia lots to view corridors in Queen Anne, we design and build decks that fit your home's architecture and terrain. We handle permits, structural calculations, and material selection—ensuring your deck meets IRC code and performs through Seattle's rainy seasons.

Deck Staining & Sealing: Protection & Renewal

Seattle's moisture and shade accelerate mildew and gray weathering on wood decks. Our brightening process uses oxalic acid to neutralize tannin stains, followed by professional sealing to protect against the 37 inches of annual rainfall and sustained humidity.

New Deck Installation Built to Code

We build new decks from footings through finish, following IRC Section R507 standards for ledger attachment, joist spacing, and post depth in Seattle's marine clay soil. Proper flashing and ledger connection prevent the rot and collapse risks that plague improperly installed decks.

Pergola & Patio Cover Installation

Extend your outdoor season with a cedar or composite pergola, or add a solid roof cover for year-round shade. We design covers to handle Seattle's snow load requirements and ensure proper drainage so water doesn't pool on joists during winter rains.

Deck Repair & Structural Restoration

Rotting boards, soft joists, and corroded fasteners are common on older Seattle decks exposed to constant moisture. We identify structural issues early and repair ledger connections, replace damaged framing, and restore railings to safe, code-compliant standards.

Deck Railing Installation & Upgrades

IRC R312 requires 42-inch railings on decks over 30 inches high. We install wood, aluminum, cable, and glass railings that meet code, complement your home's style, and withstand salt air corrosion in neighborhoods like Alki and Magnolia Bluff.

Pergola Installation: Design & Structure

Custom pergolas add character and defined outdoor space to Craftsman bungalows and modern Northwest homes alike. We build attached and freestanding designs in cedar or composite, with proper post footings for Seattle's soil conditions and slope challenges.

Why Seattle Homeowners Choose Deck Doctor

We understand Seattle lots—steep grades in Queen Anne and Magnolia, tree canopy in Ravenna, salt air on Alki. Every deck is engineered to IRC Section R507 and sized for your specific site.

01

Licensed & Insured in Washington

We hold a current Washington State contractor license and carry full liability coverage on every Seattle-area project. Your deck work is protected from start to finish, and we handle all permit filings with King County and your local jurisdiction.

02

Code-Compliant Design & Planning

We handle permit requirements, span calculations, footing design, and ledger board tie-in from the start. Your custom deck plan accounts for Seattle's wet climate, marine clay soil conditions, and structural requirements—no surprises during inspection.

03

Warranty That Transfers to Owners

Our engineered framing and installation work carry a transferable warranty that protects future homeowners. This matters in Seattle's market, where deck durability directly affects resale value and buyer confidence.

04

Inspection-Ready Framing & Fasteners

We build to code the first time. Proper footing sizing, ledger board anchoring, joist spacing, and coated or stainless fasteners (critical for salt-laden air near Puget Sound) mean your deck passes municipal inspection without callbacks or corrections.

Before & After: Seattle Deck Replacements

From rotted ledger boards to sagging joists, we've restored and rebuilt decks across Ballard, Capitol Hill, and West Seattle. See how proper footings and tie-ins transform problem decks.

BEFOREAdd Photo
AFTERAdd Photo
New Composite Deck Installation — Seattle
BEFOREAdd Photo
AFTERAdd Photo
Deck Repair & Board Replacement — Seattle
BEFOREAdd Photo
AFTERAdd Photo
Deck Staining & Sealing — Seattle

Seattle Homeowners Trust Deck Doctor

★★★★★

"The whole process was smooth from start to finish. They got the permit, explained everything clearly, and the deck turned out better than I expected."

Customer Name
Seattle, WA · Google Review
★★★★★

"Our old deck was falling apart. Rather than replace it, they rebuilt the boards and reinforced the structure. Professional crew, great warranty, highly recommend."

Customer Name
Seattle, WA · Google Review
★★★★★

"Add a real customer testimonial here. Authentic, specific reviews convert best — replace before going live."

Customer Name
Seattle, WA · Google Review
Licensed & Insured
BBB Accredited
Locally Owned · Seattle

Why Seattle Decks Fail—and How We Build Them Right

We work throughout Seattle—Wallingford, Fremont, Madison Park, Beacon Hill, and surrounding neighborhoods. Same licensed crew, same engineered standards, no matter your address.

Deck Questions Answered

Premium capped composite boards like Trex Transcend and TimberTech AZEK typically last 25–30+ years in Seattle with minimal maintenance. The protective polymer shell resists moisture absorption, mold, and mildew—critical in our 65–75% humidity range. Uncapped composites are less expensive but require more frequent cleaning and may show staining in shaded, moss-prone areas common to neighborhoods like Ravenna or Magnolia.
Yes, King County requires permits for new deck construction and most repairs. Inspections happen at footing placement, ledger board connection, structural framing, and final installation to verify compliance with the 2021 IRC Section R507. Permits protect your home's resale value and ensure your deck won't fail due to improper footings or ledger tie-ins—a common issue on older Seattle Craftsman homes.
The ledger board—where your deck attaches to your house. A failed ledger connection is the leading cause of deck collapse because it bears half the deck's load. In Seattle's damp climate, water penetration behind the ledger causes hidden rot in your home's rim joist. Proper flashing, fastening, and separation per IRC R507 are non-negotiable for structural safety and to protect your foundation.
Yes. All Deck Doctor work is backed by a warranty on craftsmanship that transfers to future owners, giving buyers confidence in the structural integrity of your deck. We follow IRC R507 prescriptive requirements for ledgers, footings, and connections so your deck passes inspection and holds up through Seattle's wet winters. Call (206) 445-7386 to discuss warranty details for your specific project.
Capped composite has a protective polymer shell bonded to all four sides of the board, creating a moisture barrier that prevents water absorption, staining, and mold growth—ideal for shaded Seattle lots. Uncapped composite is exposed wood fiber on edges and the bottom, absorbing moisture and requiring regular cleaning to prevent algae and moss, especially common in Queen Anne or areas with tree canopy. Capped costs more upfront but delivers lower maintenance in our high-humidity climate.
Wait 60–90 days after construction. New pressure-treated lumber is saturated with preservative and moisture; stain won't adhere properly until the wood dries and the treatment sets. In Seattle's wet season (October–May), drying takes longer—consider scheduling staining work during our dry window (July–September). Premature staining traps moisture, leading to peeling and accelerated rot in our rainy climate.
Decks within 30 inches of grade require 36-inch guardrails. Decks more than 30 inches above grade require 42-inch guardrails—a rule many contractors miss, causing inspection failures on elevated lots in Queen Anne, Magnolia, and West Seattle. Balusters must pass the 4-inch sphere test, and cable railings require tension verification to prevent children from using them as a ladder. Powder-coated aluminum railings offer a maintenance-free, code-compliant option that won't rust from Puget Sound salt air.

Schedule Your Free Seattle Deck Inspection

Get a site evaluation and material options. We'll identify hidden problems, explain IRC compliance, and outline your timeline. Call (206) 445-7386.

Call Now — (206) 445-7386